Free Statistical webinars
Descriptions, Links to the Recordings, and Passwords are given below
THE FOLLOWING BULLETED LIST CONTAINS TITLES OF WEBINARS THAT ARE AVAILABLE LOWER ON THIS PAGE:
Basic Statistical Concepts (principles, theorems, vocabulary, medical-device regulatory requirements) ( 6 HOURS)
Intermediate Applied Statistical Methods (with emphasis on Industrial Risk Management) ( 7.5 HOURS)
Advanced Applied Statistical Methods (with emphasis on Industrial Risk Management) ( 6.5 HOURS)
Normality Tests and Normality Transformations ( 86 MINUTES)
Statistical Significance — What it is, Why it is usually irrelevant, and How you can make it relevant ( 71 MINUTES)
Statistical “Power” ( 81 MINUTES)
Better Alternatives to AQL Sampling Plans for controlling risk in Receiving Inspection QC ( 93 MINUTES)
Introduction to Statistical Process Control ( 85 MINUTES)
Important Facts & Common Myths about SPC Control Charts & Cpk's / Ppk's ( 56 MINUTES)
How to use SPC Control Charts to meet regulatory requirements ( FDA: Process Monitoring; MDD: Complaint Trending ) ( 59 MINUTES)
Valid Statistical Rationales for Sample Sizes ( 88 MINUTES)
Statistical justification for Sample Size & use of only 3 lots for process validation ( 58 MINUTES)
Statistical Tolerance Limits for Normal and Non-Normal Data: What, Why, How? ( 72 MINUTES)
A New and Better Way to Express the Quality of a Single Lot when Reporting to Top Management or the FDA ( 58 MINUTES)
Statistical Analysis of Measurement Uncertainty (Gage R&R etc.) ( 89 MINUTES)
A Simple, Quick, Practical Alternative to Performing Gage R&R for Specification Guard-banding ( 56 MINUTES)
Process Capability for Extremely Non-Normal Data (using Reliability Plotting) ( 5 HOURS)
Reliability / Confidence Calculations for Data that are All (or almost All) the Same Value ( 26 MINUTES )
An Easier to Understand Explanation of ANOVA ( Analysis of Variance) ( 35 MINUTES)
How to Avoid Calculating Useless SPC Control Chart Limits (24 MINUTES)
=========================================================================
Basic Statistical Concepts (principles, theorems, vocabulary, medical-device regulatory requirements)
This is the entire “Day 1” of a 3-day course in Applied Statistics that I gave at least annually at Ohlone College for 20 years.
To hear and view this 6-hour webinar, use the link shown here next.
Recording link:
https://vimeo.com/1137503909/7b80df54f5?share=copy&fl=sv&fe=ci
=========================================================================
Intermediate Applied Statistical Methods (with emphasis on Industrial Risk Management)
This is the entire “Day 2” of a 3-day course in Applied Statistics that I gave at least annually at Ohlone College for 20 years.
To hear and view this 7.5-hour webinar, use the link shown here next.
Recording link:
https://vimeo.com/1137503926/3ba37e308c?share=copy&fl=sv&fe=ci
=========================================================================
Advanced Applied Statistical Methods (with emphasis on Industrial Risk Management)
This is the entire “Day 3” of a 3-day course in Applied Statistics that I gave at least annually at Ohlone College for 20 years.
To hear and view this 6.5-hour webinar, use the link shown here next.
Recording link:
https://vimeo.com/1137503873/e79d989c9e?share=copy&fl=sv&fe=ci
=========================================================================
Normality Tests and Normality Transformations
To hear and view this 86-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503694?share=copy&fl=sv&fe=ci#t=1025
=========================================================================
Statistical Significance — What it is, Why it is usually irrelevant, and How you can make it relevant.
This is a trimmed piece of a 7-hour seminar given in 2023 at Ohlone College; as such, the start and end of this recording have rough edges.
To hear and view this 71-minute webinar, use the link shown here next.
Recording link:
https://vimeo.com/1137503504?share=copy&fl=sv&fe=ci
=========================================================================
statistical “Power”
To hear and view this 81-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503736?share=copy&fl=sv&fe=ci#t=859
=========================================================================
Better Alternatives to AQL Sampling Plans for controlling risk in Receiving Inspection QC
To hear and view this 93-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503596?share=copy&fl=sv&fe=ci#t=3521
=========================================================================
Introduction to Statistical Process Control
To hear and view this 85-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503663?share=copy&fl=sv&fe=ci#t=359
=========================================================================
Important Facts & Common Myths about SPC Control Charts & Cpk's / Ppk's
To hear and view this 56-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503727?share=copy&fl=sv&fe=ci#t=1484
=========================================================================
How to use SPC Control Charts to meet regulatory requirements ( FDA: Process Monitoring; MDD: Complaint Trending )
To hear and view this 59-minute webinar, use the link shown here next:
Link to the recording:
https://vimeo.com/1137503715?share=copy&fl=sv&fe=ci#t=860
=========================================================================
Valid Statistical Rationales for Sample Sizes
To hear and view this 88-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503745?share=copy&fl=sv&fe=ci#t=668
=========================================================================
Statistical justification for Sample Size & use of only 3 lots for process validation
To hear and view this 58-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503679?share=copy&fl=sv&fe=ci#t=605
=========================================================================
Statistical Tolerance Limits for Normal and Non-Normal Data: What, Why, How?
To hear and view this 72-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503730?share=copy&fl=sv&fe=ci#t=418
=========================================================================
A new and better way to express the quality of a single lot when reporting to Top Management or the FDA
To hear and view this 58-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503464?share=copy&fl=sv&fe=ci#t=450
=========================================================================
Statistical Analysis of Measurement Uncertainty (Gage R&R etc.)
To hear and view this 89-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503674?share=copy&fl=sv&fe=ci#t=960
=========================================================================
A Simple, Quick, Practical Alternative to Performing Gage R&R for Specification Guard-banding
To hear and view this 56-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503641?share=copy&fl=sv&fe=ci#t=1109
=========================================================================
Process Capability for Extremely Non-Normal Data (using Reliability Plotting)
This 5-hour in-depth course on Reliability Plotting was given in 2 parts, in 2024.
The 1st part is theory, and the 2nd part explains (using worked examples) how to use my validated Reliability Plotting software program
(which can be downloaded for free from another page on this website, along with its free validation report).
The links to the recordings of the course are given here next.
Reliability Plotting, Part 1 of 2
Recording link:
https://vimeo.com/1137503954?share=copy&fl=sv&fe=ci#t=151
Reliability Plotting, Part 2 of 2 (also download the practice data-set file, using the link below the “recording” link)
Recording link:
https://vimeo.com/1137503976?share=copy&fl=sv&fe=ci#t=11
Practice Data Sets used in demo’s during Part 2:
RP example data sets
=========================================================================
Reliability / Confidence Calculations for Data that are All (or almost all) the Same Value
To hear and view this 26-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503473?share=copy&fl=sv&fe=ci
=========================================================================
An Easier to Understand Explanation of ANOVA (Analysis of Variance)
To hear and view this 35-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1137503434?share=copy&fl=sv&fe=ci
=========================================================================
How to Avoid calculating useless SPC Control Chart Limits
To hear and view this 24-minute webinar, use the link shown here next:
Recording link:
https://vimeo.com/1140523383?share=copy&fl=sv&fe=ci